How to Measure Exterior Doors; Understanding the Basics

in Home Improvement

The rule of thumb is that if you want to understand how to measure exterior doors, you must be precise in whatever you do to your entry exterior door. Your newly installed door should be able to operate forward and backwards freely, without sticking. The latch should be well installed and fitted to its frame snuggly to prevent insects and other particulate matter from finding their way to your house.

So taking the right measurements is key. In most cases, homeowners use pre-hung doors as replacement option. Fixed in the casing, it suits snuggly inside the frame of the door with few nails and shins to hold it into place. Alright, let’s get this right by plunging into exterior doors Oakville measurement process. Take a look.

  1. Get Rid of the Interior Wall Trim

Well, this is the first step in the process of how to measure exterior doors. You should begin from the bottom of the doorway. To remove the wall trim, use pry bar to loosen the trim and part it from the wall. Know that this may damage the wall, so when you create the space between the trim and the wall, slip in a magazine to avoid this damage. Start on one side, while working up until the entire trim is eliminated and expose the wall frame and the jambs.

  1. Identify The Width of the Rough Opening

Usually, the measurement from the outer stud below the casing or the jamb, to the last stud on the far end of the door opening. Check the door opening and identify the jamb lining the opening of the door on the interior side. Place your tape here on this surface to the other side of the door. Obtain these dimensions at the bottom, centre and the top. Draw a sketch to put down the dimensions of your entry doors Oakville.

  1. Take Measurements Behind the Jamb and Above the Door

Take measurements on these surfaces and record them on your diagram. In this case, the middle measurements are quite essential.

  1. Choose the Shortest Height and Narrowest Width

Choose these dimensions of your doors Oakville and then deduct a quarter-an inch from them. Normally, the door jambs are slightly longer compared to the door slabs. The use of shims levels your door and give your door a right fit. So, shims are typically the one-size-fits.

  1. Measure the Thickness of the Existing Door

In understanding how to measure exterior doors Oakville, the thickness is one of the part that makes the measurements of the doors Oakville challenging. Basically, entry doors are one and three-quarters inches thick. However, this is just standard measurement and yours might be different.

  1. Should I DIY My Entry Doors?

It is absolutely right to DIY your exterior doors Oakville as long as you have the right tools for taking measurements and the skills needed as explained here. Remember, precision is everything when it comes to understanding how to measure exterior doors.

However, if you are not sure of where to start and what to do, the right thing to do is to hire an expert from windows and doors Oakville Company like Total Home Oakville. Here are some things you should look at when selecting doors and windows company.

  1. Their Experience

There are many windows and doors Oakville companies and choosing one may prove strenuous. To start with, you should find out how many years the company has been in operation. The many years the company has been operating, the better since it means its installers have experience in handling various aspects of doors and windows, including door measurements.

  1. Referrals

Without a doubt, if the company has been operating for a while, it will have different projects that it has already accomplished. So, look for people who have used the services of the company you are considering and ask what their experience was like. From these sources, you will be able to make the right judgement.

  1. Certification and Insurance

It would be a great idea to find out if the company you are considering is registered and insured. The insurance will cover you and installers in case anything happens. It gives you peace of mind when working with a certified windows and doors company.

Like this article? Share with your friends!

We may earn a commission for purchases made through our links. Learn more.

Notify of

Inline Feedbacks
View all comments